Fuji Electric Frenic lift, Справочное руководство

Страница: 222 / 254

3.1 LCD monitor, keys and LED indicators on the keypad
C
hap.
3
O
P
E
R
AT
IO
N
U
S
IN
G
"T
P
-A1
-LM
2"
3.1 LCD monitor, keys and LED indicators on the keypad
The keypad “TP-A1-LM2” allows you to run and stop the motor, monitor the running status, specify
the function code data, and monitor I/O signal states, maintenance information, and alarm information.
Figure 3.1 Names and Functions of Keypad Components
LED indicators: These indicators show the current running status of the
inverter.
Refer to Table 3.1.
LCD monitor: This monitor shows the following various information
about the inverter according to the operation modes.
Refer to Figure 3.2
and Table 3.3 and
Table 3.4.
Keys: These keys are used to perform various inverter operations. Refer to Table 3.2.
Table 3.1 Indication of LED Indicators
LED Indicators Indication
(Green)
Shows the inverter running state.
Flashing No run command input (Inverter stopped)
ON Run command input
(Yellow)
Shows the warning state (light alarm).
OFF No light alarm has occurred.
Flashing /ON A light alarm has occurred. But inverter can continue running.
(Red)
Shows the alarm state (heavy alarm).
OFF No heavy alarm has occurred.
Flashing A heavy alarm has occurred. Inverter shuts off its output.
Program key
STOP key
Run key (forward)
LED indicators
Run key (reverse)
RESET key
LCD monitor
Programming keys
HELP key
SET key
UP/DOWN/LEFT/RIGHT
arrow key
3-1