Fuji Electric Frenic lift, Справочное руководство

Страница: 218 / 254

2.3 Overview of Function Code
C
hap.
2
FUN
CT
IO
N
C
O
D
E
S
K20
K21
K22
Bar Chart 1 (Display item selection)
Bar Chart 2 (Display item selection)
Bar Chart 3 (Display item selection)
These function codes specify the items to be displayed in bar graphs 1 to 3 on the LCD monitor.
-Data setting range: 1 to 30
Data Monitor item LCD indicator Definition of monitor amount 100%
1 Reference speed (Final) Spd Rated Speed (F03)
13 Output current Iout Twice the inverter rated current
14 Output voltage Vout
200 V class: 250 V
400 V class: 500 V
18 Calculated torque TRQ Twice the rated motor torque
19 Input power PWR The inverter rated capacity
28 Reference torque TRQC Twice the rated motor torque
29
Torque bias balance
adjustment (Offset) (BTBB)
BTBB Twice the rated motor torque
30
Torque bias gain adjustment
(BTBG)
BTBG Twice the rated motor torque
 The monitor items for bar charts 1 to 3 can be selected easily in Programming mode as
follows.
PRG > 1(Start-up) > 3(Disp Setting) > 6(Bar Chart 1)
PRG > 1(Start-up) > 3(Disp Setting) > 7(Bar Chart 2)
PRG > 1(Start-up) > 3(Disp Setting) > 8(Bar Chart 3)
K23 Traveling direction selection
K23 specifies
the
relation between “FWD / REV” and “Upward / Downward” for keypad displaying.
Data for K23 moving FWD moving REV
0 Upward Downward
1 Downward Upward
2-205