Endress+Hauser Proline Cubemass 300, Описание параметров устройства

Страница: 273 / 294

Proline Cubemass 300 Modbus RS485 Modbus RS485 Register Information
Hauser 273
Navigation: Expert → Output → Relay output 1 to n
Parameter Register Data type Access Selection / User entry / User interface → 
Switch status (0801–1 to n) 1: 3518
2: 3519
3: 9875 Integer Read 1 = Open
6 = Closed 154
Act. relay state (0816–1 to n) 1: 7009
2: 7010
3: 7011 Integer Read / Write 1 = Open
6 = Closed
154
* Visibility depends on order options or device settings
"Double pulse out" submenu
Navigation: Expert → Output → Double pulse out
Parameter Register Data type Access Selection / User entry / User interface → 
Master term. no. (0981) 5838 Integer Read 0 = Not used
2 = 24-25 (I/O 2)
3 = 22-23 (I/O 3) 155
Slave term. no. (0990) 5845 Integer Read 0 = Not used
2 = 24-25 (I/O 2)
3 = 22-23 (I/O 3) 155
Signal mode (0991) 5949 Integer Read / Write 0 = Passive
2 = Active
3 = Passive NAMUR
156
Assign pulse 1 (0982–1) 5993 Integer Read / Write 0 = Off
1 = Mass flow
2 = Volume flow
3 = Correct.vol.flow
74 = Target mass flow
*
75 = Carrier mass fl.
*
78 = Carrier vol. fl.
79 = Carr.corr.vol.fl
86 = GSV flow
87 = GSVa
88 = Oil mass flow
89 = Water mass flow
90 = NSV flow
91 = NSVa
92 = S&W volume flow
94 = Oil corr.vol.fl.
95 = Water corr.v.fl.
96 = Targ.corr.vol.fl
97 = Target vol. flow
99 = Oil volume flow
102 = Water vol. flow
156
Value per pulse (0983) 7495 to 7496 Float Read / Write Signed floating-point number 157
Pulse width (0986) 6998 to 6999 Float Read / Write 0.5 to 2 000 ms 157
Phase shift (0992) 6089 Integer Read / Write 0 = 90°
1 = 180°
157
Measuring mode (0984) 6001 Integer Read / Write 0 = Forward flow
1 = Reverse flow
2 = Rev. flow comp.
13 = Forward/Reverse
158
Failure mode (0985) 6009 Integer Read / Write 0 = Actual value
1 = No pulses
158