Endress+Hauser Proline Cubemass 300, Описание параметров устройства

Страница: 79 / 294

Proline Cubemass 300 Modbus RS485 Description of device parameters
Hauser 79
Additional information Description
Flow override is active
• The diagnostic message diagnostic message C453 Flow override is displayed.
• Output values
– Temperature: proceeding output
– Totalizers 1-3: Stop being totalized
Positive zero return can also be enabled via the Status input: Assign stat.inp.
parameter (→  107).
"Low flow cut off" submenu
Navigation  Expert → Sensor → Process param. → Low flow cut off
‣
Low flow cut off
Assign variable (1837) →  79
On value (1805) →  79
Off value (1804)
→  80
Pres. shock sup. (1806) →  81
Assign variable 
Navigation  Expert → Sensor → Process param. → Low flow cut off → Assign variable (1837)
Description Use this function to select the process variable for low flow cutoff detection.
Selection • Off
• Mass flow
• Volume flow
• Correct.vol.flow
Factory setting Mass flow
On value 
Navigation  Expert → Sensor → Process param. → Low flow cut off → On value (1805)
Prerequisite One of the following options is selected in the Assign variable parameter (→  79):
• Mass flow
• Volume flow
• Correct.vol.flow