Endress+Hauser Proline Cubemass 300, Описание параметров устройства

Страница: 135 / 294

Proline Cubemass 300 Modbus RS485 Description of device parameters
Hauser 135
Val. at min.freq 
Navigation  Expert → Output → PFS output 1 to n → Val. at min.freq (0476–1 to n)
Prerequisite In the Operating mode parameter (→  126), the Frequency option is selected, and one
of the following options is selected in the Assign freq. parameter (→  132):
• Mass flow
• Volume flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
• Density
• Ref.density
• Concentration
*
• Temperature
• Carr. pipe temp.
*
• Electronic temp.
• Osc. freq. 0
• Freq. fluct. 0
• Osc. ampl. 0
*
• Osc. damping 0
• Osc.damp.fluct 0
• Signal asymmetry
• Exc. current 0
Detailed description of the options Oscil. frequency, Oscil. amplitude, Oscil.
damping and Signal asymmetry : Value 1 display parameter (→  18)
Description Use this function to enter the measured value for the start value frequency.
User entry Signed floating-point number
Factory setting Depends on country and nominal diameter
Additional information Dependency
The entry depends on the process variable selected in the Assign freq. parameter
(→  132).
Val. at max.freq 
Navigation  Expert → Output → PFS output 1 to n → Val. at max.freq (0475–1 to n)
Prerequisite In the Operating mode parameter (→  126), the Frequency option is selected, and one
of the following options is selected in the Assign freq. parameter (→  132):
• Mass flow
• Volume flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
• Density
• Ref.density
* Visibility depends on order options or device settings