![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374219.webp)
C, counter relay
215
02/16 MN05013001Z EN
C, counter relay
The counter relay (function relay) counts pulses that are
received at counter input C_. The count direction can be set.
You can set a lower and higher limit setpoint as comparison
values for the counter relay function block, as well as a start
value.
easySafety allows the use of up to 16 counter relays.
h
Counting is carried out cyclically. The time of a pulse must
therefore be greater than twice the cycle time.
h
Square wave count pulses are required to ensure a 1:1
mark to space ratio.
The relay counts only in RUN mode.
h
page 337 on Example with timing relay and counter
function block provides information on the timing relay
and counter function block.
Содержание easySafety
