![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374126.webp)
Wiring with ea
s
ySafety
122
02/16 MN05013001Z EN
Transfer from and to the
memory card
Configurations are transferred via the serial multi-function
interface. There are two possibilities:
• From or to a easySafety memory card,
• Via the programming cable from or to the COM serial PC
interface and thus from or to the configuration software
easySoft-Safety,
page 129 or in the Online Help.
How to remove the cover of the serial multi-function
interface, connect a programming cable and fit a memory
card is described in section “Connecting the serial multi-
function interface” on page 68.
Information on the memory card
The 256 KB memory card easySafety ES4A-MEM-CARD1 is
available as an accessory for devices. This memory card can
neither be read nor written by an easy800 or an MFD-Titan.
A configuration with all the necessary parameters can be
loaded from the memory card into the easySafety device or
written from the device to the card.
Each memory card stores a single easySafety configuration
and two memory languages.
All information on the memory card is retained when the
card is in a de-energized state, so that you can use the card
for archiving, transporting and copying configurations.
Содержание easySafety
