![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374464.webp)
Safety function blocks
460
02/16 MN05013001Z EN
Enable
The Enable parameter specifies whether an external function
block enable is required. Further information can be found at
section “Enable parameter, EN enable coil” on page 345.
This parameter is factory set to NEN, the function block is
active without an external enable.
Operating mode
After easySafety has determined the conditions for safe
operation, there are different kinds of restarts possible. They
are described in greater detail as operating modes in chapter
“Operating mode parameter, RE reset coil” on page 346.
This parameter is factory set to MST, manual start.
Output
Diagnostics output DG: Provides information the states of
the function block. It is evaluated in the standard circuit
diagram e. g. with the diagnostics function block.
Table 19:
Diagnostics-/-Error codes
Parameters
Function, parameterisation in the func-
tion block
EN
External enable required
NEN
No external enable required
Parameters
Function, parameterisation in the func-
tion block
MST
Manual start
CST
Controlled start
Parameters
Function, parameterisation in the func-
tion block
DG:
Diagnostics: double word
Содержание easySafety
