![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374585.webp)
Enabling overwriting from the
card
581
02/16 MN05013001Z EN
Enabling overwriting from
the card
The easySafety device is factory set to disallow the automatic
overwriting of the newly entered safety configuration in the
device with the configuration from the memory card.
However, setting the system parameter TRNSF FROM CARD
can allow this.
X
Press DEL and ALT to call up the System menu.
X
Choose S PARAMETERS -> SYSTEM to access TRNSF
FROM CARD.
X
Press OK. The tick indicates that the configuration in the
device is automatically overwritten from the card after the
memory card is fitted and the operational voltage is
switched on.
After a memory card is fitted, this system setting is checked
after the device is switched on. If the TRNSF FROM CARD is
activated
å
, the existing configuration in the device is over-
written on the memory card.
If it is not activated, the existing safety configuration is not
overwritten in the device. However, if the safety configura-
tions on the device and on the card are identical, the
standard configuration is transferred to the device.
The following table shows how the easySafety behaves
according to the set function and the conditions shown
when the power supply is switched on.
j
Danger
Remember that by activating this function, the safety
configuration can be overwritten from the card automati-
cally. The master password does not offer any protection
if a card with a different safety configuration is fitted.
Ensure that no unwanted safety configuration is trans-
ferred to the device. For example, this may occur by the
accidental mixing of two memory cards.
If a new safety configuration is loaded to the device, you
must check the safety equipment of your machine/plant
and test it.
S
EAL SAFETY
Æ
TRNSF FROM CARD
å
Содержание easySafety
