![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374568.webp)
ea
s
yNet network
564
02/16 MN05013001Z EN
REMOTE IO
(Operation as input/output device, without own circuit
diagram)
Factory setting REMOTE RUN = On
If the REMOTE IO mode is switched on, and only if they do
not have their own circuit diagram, the conventional NET
stations with NET-ID 2 - 8 function as input/output devices.
The standard settings for the input and output devices are:
h
The operation of an easySafety device exclusively as an
input/output device is not possible. For this reason the
easySafety does not support the REMOTE IO function. The
easySafety device can only be operated on the NET as a
station with a circuit diagram. Accordingly, the outputs
can only be written to via the standard circuit diagram of
the respective device, and not by NET station 1 by using
the nQ.. and nS.. operands.
h
By default all devices except easySafety are configured as
input and output devices, which make their inputs and
outputs available to the NET station with NET-ID 1. This
has the advantage that devices can be used immediately
as I/O devices, regardless of whether they have a display
or not. You must only assign the NET-ID, baud rate and
bus delay to this type of device.
As soon as you enter a circuit diagram on this kind of NET
station with NET ID 2 - 8, the REMOTE IO function is
automatically deactivated.
This prevents write access to the outputs of this kind of
NET station, both locally from its own circuit diagram as
well as from REMOTE station 1.
SEND IO
å
REMOTE RUN
å
Содержание easySafety
