![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374582.webp)
ea
s
ySafety Settings
578
02/16 MN05013001Z EN
Standard password no longer known or incorrectly
entered
If you no longer know the standard password precisely, you
repeat your password entry several times. If the DELETE
PROG function is activated in the AREAS menu, the pass-
word can be entered as often as required.
Have you entered an incorrect standard password?
X
Enter the standard password once more.
On the fifth incorrect entry the easySafety device asks
whether the password should be deleted, to which you reply
with OK or ESC.
X
Press OK.
Password protection for the standard configuration is
removed. The easySafety device returns to the status display.
X
Alternatively press ESC.
Data is not deleted. Standard circuit diagram and data are
retained. You can now start entry attempts once more.
Master password no longer known
If the master password is no longer available, you must
restore the device to its default settings. This can be done in
two ways:
• via the PC with easySoft-Safety, irrespective of RUN or
STOP.
• by the manufacturer.
ENTRY
STD PASSWORD
XXXXXX
DELETE
STANDARD
PROGRAM?
h
Caution!
The stored standard circuit diagram and all parameters of
the easySafety device are lost.
Содержание easySafety
