![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374422.webp)
Safety function blocks
418
02/16 MN05013001Z EN
Coils and contacts
Function block coils initiate the functions of the function
block and monitor the connected safety transmitters.
The contacts of a safety function block confirm the enable
conditions present, selected operating modes or indicate
errors.
Coils
Connect the following function block coils directly to the
device terminals IS1 to IS14. Monitor the signal of the
connected encoders in the safety circuit diagram.
• LM..I1 to LM..I2.
• LM..A1 to LM..A2.
• LM..B1 to LM..B2.
The override coil LM..OV makes it possible to bridge the
protective function during the muting in the safety circuit
diagram, in order to rectify a fault.
The override function is limited by the override release time
LM..RT.
The Reset coil LM..RE resets the function block in Manual
Start (MST) and Controlled Start (CST) operating modes and
starts normal operation. It is used in the safety circuit
diagram.
Coil
Function
LM..I1
Light barrier, channel 1
LM..I2
Light curtain, channel 2
LM..A1
Muting sensor group A, sensor 1
LM..A2
Muting sensor group A, sensor 2
LM..B1
Muting sensor group B, sensor 1
LM..B2
Muting sensor group B, sensor 2
Coil
Function
LM..OV
Override
Содержание easySafety
