![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374179.webp)
A, analog value comparator/
threshold value switch
175
02/16 MN05013001Z EN
Wiring of the function block
You wire the analog value comparator function block in the
standard circuit diagram with its contacts. Example of a
function block for comparing analog values:
Figure 71:
Wiring the contacts
Parameters
When using the function block in the circuit diagram for the
first time, use OK to automatically enter the general display
of function block parameters, as shown in the figure on the
left. Enter the function block settings here. The display
contains the following elements:
The parameters consist of the following:
M 01----A 01Q1-----------------
Ä
QS01
M 02----A 01CY-----------------S QS02
A 02 GT +
>I1
>F1
>I2
>F2
>OS
>HY
A 02
Function block analog value comparator number 02
GT
Mode: Greater than
+
Parameter display: Call enabled
>I1
Comparison value 1
>F1
Gain factor for >I1 (>I1 = >F1
x
value)
>I2
Comparison value 2
>F2
Gain factor for >I2 (>I2 = >F2
x
value)
>OS
Offset for the value of >I1
>HY
Switching hysteresis for value >I2 (Value HY applies to
positive and negative hysteresis.)
Содержание easySafety
