![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374322.webp)
Standard function blocks
318
02/16 MN05013001Z EN
Time range
The function block parameter determines in which time
range and at which resolution the relay operates.
Parameter display
The display of the parameters during operation can be
disabled. Further information can be found in section
“Parameter assignment from the standard circuit diagram”
on page 161.
This parameter is factory set to +.
Parame-
ters
Time range and setpoint
Reso-
lution
S 000.000
Seconds; 0.05 to 999.995 s for
constants and variable values
5 ms
M:S 00:00
Minutes:Seconds; 00:00 to 99:59 only
for constants and variable values
1 s
H:M 00:00
Hours:Minutes; 00:00 to 99:59 only
for constants and variable values
1 min.
h
Minimum time setting: 0.05 s (50 ms).
If a time value is less than the easySafety cycle time, the
elapsed time will only be recognised in the next cycle.
Parameters
Function
+
Parameters are displayed
-
Parameters are not displayed
Содержание easySafety
