![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374378.webp)
Safety function blocks
374
02/16 MN05013001Z EN
Operating mode
After easySafety has determined the conditions for safe
operation, there are different kinds of restarts possible. They
are described in greater detail as operating modes in section
“Operating mode parameter, RE reset coil” on page 346.
The factory setting of this parameter is MST, Manual Start.
Evaluation
The parameter sets the function block for monitoring emer-
gency-stop switches with one or two break contacts.
easySafety is defined with a default setting for 2-channel
evaluation.
Discrepancy time
The discrepancy time ES..DT can be set when the function
block is set for 2-channel emergency-stop monitoring.
easySafety is factory set with a discrepancy time of 3.0 s.
Parameters
Function, parameterisation in the func-
tion block
MST
Manual start
CST
Controlled start
AST
Automatic start, no manual restart
Parameters
Function, parameterisation in the func-
tion block
1CH
1-channel evaluation
2CH
2-channel evaluation
Parameters
Function, parameterisation in the func-
tion block
>DT
OFF; 0.5 - 3.0 s; adjustable in increments of
g
0.5 s
Содержание easySafety
