![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374381.webp)
ES, Emergency-stop
377
02/16 MN05013001Z EN
Contacts
The ES..QS contact enables hazardous movement in the
safety circuit diagram. It is closed as long as the emergency-
stop switch has not been triggered.
If the ES..ER contact is wired in the standard and/or safety
circuit diagram, it indicates the presence of an error by
closing.
• Timeout of discrepancy time
• With 2-channel operation, only 1 channel opens and
closes.
Memory requirement
The ES function block requires 28 bytes of memory.
Operation of the function block
If all conditions for safe operation are fulfilled, the enable
contact ES..QS is closed and enables operation.
If one of the emergency-stop channel coils drops out, the
enable is removed, the enable contact ES..QS opens and the
hazardous movement can be stopped.
Error detection and acknowledgement
The emergency-stop function block detects the timing out of
the discrepancy time.
Contact
Function
ES..QS
Enable (contact closed -> Emergency-stop
switch not triggered)
ES..ER
Error message (contact closed -> Error)
Error
Error acknowledgement
Timeout of discrep-
ancy time DT
2-channel operation: dropping out of
ES..I1 and ES..I2
Содержание easySafety
