![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374165.webp)
Working with function blocks
161
02/16 MN05013001Z EN
Parameter assignment from the standard circuit
diagram
When a standard function block is added for the first time,
the parameter dialog is started automatically.
The figure on the left shows a parameter dialog with the
example of the standard function block TS, Safety timing
relay. The parameter options depend on the standard
function block concerned. They cover the basic parameters
of the first line up to the +/- character. Through the +/-
symbol you can switch the parameter display on and off in
operating mode RUN to allow (+) or prevent (-) changes to
be made to reference points (constants). You must at least
confirm the +/- character with OK.
X
Use the cursor buttons
ú í
to select the parameter to be
changed, for example the time range “S”.
X
Use the cursor buttons
ÍÚ
to change the parameter value
to a different time range such as M:S.
X
Press OK to exit the parameter dialog if you wish to save
the parameters or press ESC, if you do not wish to
parameterise the function block and add it to the circuit
diagram.
After saving or cancelling, the cursor returns to the position
in the standard circuit diagram where you last left it.
To complete the parameter setting of the standard function
block, such as the setting of setpoints, call up the function
block editor in the following way:
X
Press
ESC
in order to save the circuit diagram with the
newly added standard function block.
X
Answer the subsequent SAVE prompt with OK.
The standard circuit diagram is saved and the easySafety
device changes to the next higher menu level.
T 01 X?
S
+
>I1
>I2
QV>
h
Parameter sets can only be enabled or protected via the
FUNCTION RELAYS menu, or via the circuit diagram with
the “+” enable and with “–” inhibit parameter set
characters.
Содержание easySafety
