![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374231.webp)
D, text display
227
02/16 MN05013001Z EN
Figure 91:
Wiring of the function block contact
Figure 92:
Wiring the enable coil with Set/Reset
Parameters
When using the function block in the circuit diagram for the
first time, use OK to automatically enter the general display
of function block parameters, as shown in the figure on the
left. Enter the function block settings here. The display
contains the following elements:
Parameter display
The display of the parameters during operation can be
disabled. Further information can be found in section
“Parameter assignment from the standard circuit diagram”
on page 161.
This parameter is factory set to +.
D 01Q1-------------------------
Ä
M 02
M 05-------------------------S D 01EN
M 06-------------------------R D 01EN
D 16 +
D16
Function block: Text output, number 16
+
Parameter display: Call enabled
Parameters
Function
+
Parameters are displayed
-
Parameters are not displayed
Содержание easySafety
