Eaton easySafety, Руководство пользователя

Страница: 162 / 695

Wiring with ea s ySafety
158
02/16 MN05013001Z EN
Setting function block parameters
Safety function blocks with which you can implement your
safety functions are always part of the safety circuit diagram.
Unlike standard function blocks, the parameters are set from
the safety circuit diagram instead of in a special function
block editor.
Standard function blocks are simply called in the standard
circuit diagram and also enter the basic parameters there.
You assign actual value and setpoint parameters for the
function block inputs and outputs via the FUNCTION RELAYS
menu. You can of course also set the basic parameters in the
function block editor and then add the standard function
block in the standard circuit diagram as a contact or coil.
The edited standard function blocks are always part of the
standard circuit diagram.