WR-400™
4-CHANNEL WIRELESS
RELAY KIT
Installation / Operation
Manual
Wireless
RELAY
TM
Страница 1: ...WR 400 4 CHANNEL WIRELESS RELAY KIT Installation Operation Manual Wireless RELAYTM ...
Страница 2: ... anAC volt meter and confirm 24 volts across and at the If no voltage is present relocate one or both modules until communications is established DO NOT INSTALL TRANSCEIVERS IN METAL ENCLOSURES Testing the communications link COM 24V Base Module 24V CH 1 SEND COM CH 1 REC Satellite Module WR 400 BM Wireless Transceiver Base Module WR 400 SM Wireless Transceiver Satellite Module WR 400 BM Wireless ...
Страница 3: ...ammed as Address 2 Take the corresponding satellite module WR 400 SM and use the same steps to program it as Address 2 Sequence of Operation WR 400 BM Base Module WR 400 SM Satellite Module Failsafe Protection When base module channel 1 2 or 3 receives a 24 volts signal the satellite module detects the change and closes its corresponding channel 1 2 or 3 contact which outputs 24 volts When satelli...
Страница 4: ...evice may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Specifications Typical Heat Pump Application WR 400 BM Wireless Transceiver 3 Send 1 Receive CH1 SEND CH2 SEND CH3 SEND CH4 REC WR 400 SM Wireless Transceiver 1 Send 3 Receive CH1 REC CH2 REC CH3 REC CH4 SEND C R W2 Y1 Y2 O B G C R W2 Y1 Y2 O B ...
