![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374393.webp)
FS, safety foot switch
389
02/16 MN05013001Z EN
Operation of the function block
The safety function of the function block is based on the
following contact mirror variants of the foot switch.
2-channel (make/break combination):
Figure 194:
Contacting of the 2-channel foot switch with three
stages 0, 1, 2 and two contacts A, B
Connect the 1st channel to FS..I1, the 2nd channel to FS..I2.
4-channel (2 make/break combinations):
Figure 195:
Contacting of the 4-channel foot switch with three
stages 0, 1, 2 and four contacts A, B, C, D
Connect the 1st channel to FS..I1, the 2nd channel to FS..I2,
the 3rd channel to FS..I3 and the 4th channel to FS..I4.
You can use the foot switch to initiate the enable signal
under the following conditions:
• The foot switch is in position 0.
• Function block coil FS..SA is activated.
• Pressing the enable switch to position 1 closes the enable
contact FS..QS.
A
B
0
1
2
A
B
0
1
2
C
D
Содержание easySafety
