![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374130.webp)
Wiring with ea
s
ySafety
126
02/16 MN05013001Z EN
Loading the configuration from the card
(CARD -> DEVICE)
Requirements:
• The device in the STOP.
• A memory card is fitted in the device and has a
configuration.
• You are in the CARD menu and password protection is
removed,
If a configuration with a safety circuit diagram is already in
the device, this is protected separately. If the safety circuit
digram on the card is the same as the one in the device, only
the standard circuit diagram is transferred. If however the
safety circuit diagram in the device is different to the one on
the card, you are requested to enter the system password
before the safety circuit diagram in the device is overwritten.
1) Key to figure 48:
The easySafety device stores a description of its inputs/outputs
in the I/O profile. The current device version knows the
following two I/O profiles
• 14 IS, 4 QS (relay outputs) or
• 14 IS, 4 QS (transistor outputs) and 1 QR (relay output). The
configuration to be loaded on an easySafety must have the same
I/O profile as the target device; otherwise the easySafety device
will reject the transfer.
2) If there is a transfer problem or a check sum error, the
easySafety device will output the message PROG INVALID.
3) Plausibility check that detects a faulty configuration of device
version 02-xxx and refuses a transfer to the device.
ENTRY
PASSWORD
------
h
All passwords that are present when saving to the card are
also reactivated after the card is loaded.
Содержание easySafety
