![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374368.webp)
Safety function blocks
364
02/16 MN05013001Z EN
Tabelle 12: Diagnostics-/-Error codes
Further information on these outputs is provided in section
“Common features”, page 348.
Coils and contacts
Function block coils initiate the functions of the function
block and monitor the connected safety transmitters.
The contacts of a safety function block confirm the enable
conditions present, selected operating modes or indicate
errors.
Coils
Connect the function block coils EN..I1 and EN..I2 directly to
the device terminals IS1 to IS14. The coils monitor the signal
of the light curtain in the safety circuit diagram. The coils
monitor the signal of the enable switch in the safety circuit
diagram.
Use function block coil EN..SA to activate the function block.
Associate the coil in the safety circuit diagram for example
with the enable contact of another safety function block.
Status number
Plain text
Hexadecimal (0–F)
decimal (0-9)
0000
0000
No Enable.
2001
8193
Enable issued; waiting for input.
2005
8197
Only one channel has been opened.
2012
8210
Enable switch in OFF position.
8002
32770
Switch in ON position (QS = 1).
F002
61442
Error: Enable duration exceeded.
F00E
61454
Error: Only one channel was opened and closed.
F00F
61455
Error: Undefined switch position.
h
Activate the bridging of the guard with a key switch. The
key switch should be installed so that you have a complete
view of the hazardous zone.
Содержание easySafety
