Eaton easySafety, Руководство пользователя

Страница: 18 / 695

14
02/16 MN05013001Z EN
1. The configuration examples provided here have been
created by Eaton to the best of its knowledge and belief and
to the current technological standards. The possibility of
errors in the configuration can not, however, be excluded
and the provided configuration examples do not cover all
function blocks and applications available for the easySafety
devices. If you encounter any malfunction, error and/or any
other problem when using the configuration samples, please
contact your Eaton contact person.
2. The configuration, the preparation of a circuit diagram
and the initial start-up of easySafety devices require safety
know how and electro technical know how. If an easySafety-
device is improperly connected or wrongly configured and
active components such as motors and remote cylinders are
being actuated, plant components and humans are
endangered.
3. When using the provided sample programs and
generating a configuration with easySoft-Safety, the user
has the sole responsibility to observe the following:
• All relevant regulations regarding the preparation of a
circuit diagram for easySafety-devices according to the
updated user manuals AWA and AWB of ES4P by Eaton,
• All relevant regulations, directives, rules and standards of
occupational safety and accident prevention regarding the
intended preparation of circuit diagrams, initial start-up
and the operation of easySafety-devices, particularly those
issued by Employers’ Liability Insurance Associations
(Berufsgenossenschaft),
• Acknowledged rule of technology and state of science.
• All other general due diligence regarding the prevention of
damages to life and physical condition of persons as well
as material damage.
4. Eaton assumes no liability for any damage caused by the
application of the provided sample programs contrary to the
preceding safety instructions and operating guidelines
according to the preceding numbers 1 to 3.