Eaton easySafety, Руководство пользователя

Страница: 563 / 695

Description of the NET-
PARAMETERs
559
02/16 MN05013001Z EN
Description of the NET-
PARAMETERs The NET parameters described below can be found in the
NET PARAMETERS menu:
X
Simultaneously press the DEL and ALT buttons with the
status display active. Then choose STD PARAMETERS ->
CONFIGURATOR -> NET -> NET PARAMETERS and press
the OK button.
NET ID (Station number)
Factory setting NET ID = 00.
Selectable NET IDs 1 - 8.
The NET ID of a device is used to give it a unique
identification on the NET. A NET ID can therefore only be
assigned once within a network.
The factory setting NET ID 00 prevents the possibility of
double addressing when an existing NET station (NET ID 1-
8) has to be replaced.
BAUD RATE
Data transfer rate of the NET
Factory set baud rate = 125 KB.
The devices allow a NET transfer speed of 10 - 1000 Kbaud,
selectable in defined steps. Possible baud rates are: 10, 20,
50, 125, 250, 500 and 1000 KB
X
Use
Í
and
Ú
to select a baud rate of 10 - 1000 KB and
confirm your selection with OK.
The maximum transmission speed depends on the total
length of the network cables (
a Technical data, section
“Network easyNet” on page 669).
h All NET stations must have an identical transfer speed set.
This is achieved automatically if you carry out the NET
configuration via NET station 1 (
a page 533).