![background image](http://html1.mh-extra.com/html/eaton/easysafety/easysafety_manual_3958374599.webp)
Setting contrast and backlight
595
02/16 MN05013001Z EN
Setting contrast and back-
light
The background illumination of the LCD display can be
switched off. The display contrast can be set to one of five
stages. The display is not required during operation. The
backlight only needs to be active during maintenance oper-
ations or when texts have to be displayed.
If the backlight is switched off, it will switch back on when a
button is pressed. The backlight switches off automatically
60 s after a button was last pressed.
The contrast and backlight settings are device settings.
X
Switch to the system menu.
X
In the system menu choose STD PARAMETERS -> SYSTEM
-> DISPLAY and press OK.
The menus for setting the contrast and backlight are
displayed.
X
Press the OK button and change the contrast setting.
X
Use the cursor buttons
Í
and
Ú
to set a contrast between
–2 and +2 and press OK to confirm the setting.
The contrast setting is valid until it is changed again.
h
If easySafety is password protected, the system menu
cannot be accessed until easySafety has been unlocked
(
CONTRAST:
0
LIGHTING
å
CONTRAST: +1
LIGHTING
å
Содержание easySafety
