INSTALLATION INSTRUCTIONS
33-00349EF-06
HPSR101
RESIDEO HYDRONIC PRO
SWITCHING RELAY
WHAT'S IN THE BOX?
• Hydronic Switching Relay
• Mounting Hardware (3 Screws and 3 Wall Anchors)
• 1, 1-Amp Fuse; 1, 6-Amp Fuse
• Install Manuals (English & French)
CAUTION
1. Disconnect power supply before beginning
installation to prevent electrical shock or
equipment damage.
2. Use copper conductors only.
3. Use only NEC Class 1 wire for all line voltage
wiring connections. Class 1 wires must be
rated for at least 167 °F (75 °C).
4. For installation by professionals only.
PANEL SPECIFICATIONS
Table 1.
NOTES:
1.
All circulator relay connections are rated for 5A full load and 30A locked rotor (1/6 to 1/2HP depending on
technology) at 120VAC. Check circulator plate ratings to ensure full load current is not exceeded.
2.
All thermostat connections supply a 24V Class 2 output.
OS Numbers
Transformers
Input Power
Pump Fuse
Type 1 Enclosure
Width
Height
Depth
HPSR101
(1) 24V 15VA
120VAC, 60Hz, 1
6 Amp
5-1/8"
6-3/4"
2-3/8"
