Danfoss ED-DT318B, Инструкция по установке и эксплуатации

Страница: 64 / 186

Installation and Operation Guide
ED-DT318B
Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission
BC353060341319en-000101 Revision D © Danfoss | November 2020 | 63
Classified as Business
When the
Transmission Mode
is Neutral, this value will be ignored.
When the
Transmission Mode
is Reverse or Forward Low Forward High or Forward Automatic:
this value will control the torque the TCU commands the MCU to produce to accelerate or
decelerate the vehicle.
In all modes, when this value exceeds the Maximum Allowed Drive Torque , it will be treated as
if it were that value. Likewise, if it exceeds Maximum Allowed Regen Torque , it will be treated as
if it were that value.
Note: This value will control the amount of torque the motor will attempt to produce, but may
or may not be equal to it.
The high gear ratio is 1:1, so the motor will attempt to produce the same amount of
torque as is
Requested Torque
.
The low gear ratio is 3.529:1, so the motor will attempt to produce the amount of torque
equivalent to
Requested Torque
divided by 3.529. The multiplying effect of the gear
ratio will result in the requested torque being supplied to the driveshaft.