Installation and Operation Guide
ED-DT318B
Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission
BC353060341319en-000101
Revision D
© Danfoss | November 2020 | 133
Classified as Business
Menu Choice
Button
Description
Actions
Show Event Log
Shows the attached motor’s event log in a dialog box. See
Event Log,
for more details.
Date into Event Log
Marks the Event Log of the connected controller with today's
date. The date is in the form yyyy/mm/dd. Only one marker is
allowed per day.
DAQ Configuration
Opens a pop-up menu with multiple DAQ configuration
options. See DAQ,
Section 8.5
for more details.
Change COM port
Closes communication to the controller through the RS232
port and brings up the “Change COM Port” dialog box.
Canceling this dialog box causes the diagnostic software to
exit. See
Section 8.2
for more details.
Show CAN tests
Shows the CANbus Test dialog box. This dialog box
generates and sends CANbus errors and status condition
messages, so you can test whether your connecting software
is responding correctly. See the
Danfoss Power Solutions
CANbus Interface Manual
for more details.
Allow PWMs at Stop
Normally, the pulse width modulation (PWM) the Danfoss
Power Solutions controller uses to control its motor is not
present when zero torque is requested and the motor is not
spinning. This menu toggle (checked when true) causes the
controller to PWM even when at rest. This is useful when you
need to test your system’s noise immunity to the PWM
energy without actually operating the motor.
Help
User Manual
Shows the
Danfoss Power Solutions Motor System User
Manual
. This is a PDF file.
CAN Manual
Shows the
Danfoss Power Solutions CANbus Interface
Manual
. This is a PDF file.
About UqmMotor
Opens the “About UqmMotor” dialog box, showing the
application’s version number and the attached controller’s
temperature limits.
8.4
Logging Data
Data Logging is a powerful diagnostic tool that records motor system measurement data to a spreadsheet file in
real time, at quarter-second to multiple-second rates. The diagnostic software can log data at these rates
indefinitely, only limited by the disk drive space of your computer.
Log files are located and named via the logging set up dialog box. The files are numbered so that each name is
unique and no data is lost. The naming convention includes the date. For example, two files taken on June 21st,
2013 with default settings would be named:
20150318LOG_test00.csv
Содержание ED-DT318B
Страница 185: ......
