Installation and Operation Guide
ED-DT318B
Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission
BC353060341319en-000101
Revision D
© Danfoss | November 2020 | 155
10
Appendix B: Vehicle responses to Danfoss Power Solutions’ CAN Status Messages
10.1
Vehicle responses to Danfoss Power Solutions’ CAN Status Messages
The customer and/or vehicle integrator is responsible verifying that the configuration data in TCU Status Message 1 (
Section 7.3.1
) match those for which
the vehicle was designed.
The customer and/or vehicle integrator is responsible for proper responses to the Danfoss Power Solutions CAN Status and Error signals contained in TCU
Status Message 2 (
Section 7.3.2
) and TCU Status Message 3 (
Section 7.3.3
TCU Status Message 4 (
Section 7.3.4
), TCU Status Message 5 (
Section 7.3.5
), TCU Status Message 6 (
Section 7.3.6
), and TCU Status Message 7 (
Section 7.3.7
provide feedback signals to be used to control the system.
The Vehicle Control Unit/Module will need to determine the appropriate actions to these messages. Danfoss Power Solutions is providing the status and
error messages so that appropriate actions are taken at the vehicle level. Danfoss Power Solutions assumes no liability if the vehicle does not respond to our
status and error messages.
For a typical electric vehicle application, the following actions should be considered as part of the vehicle integration.
Содержание ED-DT318B
Страница 185: ......
