Installation and Operation Guide
ED-DT318B
Drive Train Systems with Traction Control, Inverter/Controller, and Motor with 2 Speed Transmission
BC353060341319en-000101
Revision D
© Danfoss | November 2020 | 141
Classified as Business
Menu Choice
Button
Description
Load from file
Loads a DAQ configuration file into the Danfoss Power Solutions Motor
controller.
In addition to menu access, complete Data Acquisition functionality is accessible from the lower right corner of
the Diagnostic Software front panel itself
illustrate these Data Acquisition
group components.
Figure 8.18: Front Panel Components of DAQ
Table 8.10: Front Panel DAQ Group Components
Label
Description
Put into name
This edit box is a shortcut to setting the name portion of a DAQ filename. Normally, this
name is set in the DAQ Set Up, but when using the manual trigger it is more convenient
to be able to change the filename without going into the Set Up dialog box.
Set Up
This button is the equivalent of the menu choice Actions > Daq Configuration > Edit
Settings. It brings up the DAQ Set Up dialog box. This functionality is described in detail
later in this section.
Re-enable
After a DAQ trigger, all triggers are disabled. This button quickly re-enables the last set of
trigger settings. Alternatively, you can use the DAQ Set Up to re-enable them or change
them. They can be automatically re-enabled as well.
Trigger/Cancel
When this button is labeled “Trigger,” it causes an immediate DAQ trigger following the
settings already set in DAQ Set Up.
While a DAQ file is being uploaded from the controller into the PC, this button’s label
changes to “Cancel.” Clicking on it cancels the upload and clears the buffer. It also
disables all triggers.
Show File
Starts your spreadsheet program with the last uploaded DAQ file. This feature will only
work if you have a spreadsheet program that has registered itself for files with the CSV
(comma-separated values) file format.
Содержание ED-DT318B
Страница 185: ......
