Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 231 / 468

Configuring IPX 15-7
1 A value of 0 disables aging.
Blocked Port Flag
causes the IPX interface to be enabled (
N
) or disabled (
Y
) at node IPL. The port will
remain in that state until this parameter is changed (and sent to the node).
Interface Type
0
= X.25
1
= Ethernet
2
= FRL (frame relay) Z
3
= Network
4
= 802.3
5
= 802.5 (Token Ring)
A network interface ties the local node (via any available trunk) to all other
FRX8000 nodes in the network with IPX interfaces. A node should not
have more than one network interface.
Frame Type
0
= TYPE_II matches Novell’s Ethernet_II frame type.
1
= RAW matches Novell’s Ethernet_802.3 frame type.
2
= LLC matches Novell’s Ethernet_802.2 or Token-Ring frame type.
3
= SNAP matches Novell’s Ethernet_SNAP or Token-Ring_SNAP frame type.
Table 15-4 IPX Network Interface Parameters
Parameter Valid Values Default Value
Bl ocked Port Flag Y/ N N
Interface Type 0–5 1 (Ethernet)
Fr ame Type 0 0 (TYPE_II)
Maximum Transmission Unit 31–576 576
Por t Di agnostics Enabl ed Y/ N Y
NetBIO S Enabled Y/ N N
NetBIO S Hops 0–255 8
RI P Enabled Y/ N Y
SAP Enabled Y/ N Y
Periodic RIP Enabled Y/ N Y
Periodic RIP Ti mer (seconds) 1–65535 60
Periodic SAP Enabled Y/ N Y
Periodic SAP Timer (seconds) 1–65535 60
Periodic SAP Timer (seconds) 0–65535
1
180
RI P Maximum Si ze (bytes) 54–446 446
SAP Age Ti mer (seconds)
0–65535
1
180
Transpor t Ti me (55ms ticks)
0–255 1
Seri ali zation Enabl ed Y/ N Y
Watchdog Spoofing Enabl ed Y/ N N
Bandw. Al loc. Group 1–3 1