Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 212 / 468

13-22 FRX8000 3. 0 User G uide, Rev 02
Primary/Secondary Packet Size
is the maximum packet size that can be transmitted across the interface at either end
of the PVC.
Primary/Secondary Window Size
is the maximum window size at either end of the PVC.
Creating/Deleting a PVC On Line
You can create a temporary PVC, then delete it later. (Deleting a PVC will break the
connection, but the LCNs will remain dedicated to the PVC until the next IPL of the
nodes at both ends.)
1. Press
[D]
at the Operations Menu (or
[B], [D]
from the Main Menu).
2. When prompted, enter:
●
PVC Type
:
2
= Async to async,
4
= Async to X.25.
●
Any other requested information, noting the values in Table 13-5 .
3. When prompted, press
[C]
to create a connection or
[D]
to delete a connection.
If the operation is successful,
PVC Created/Removed
will be displayed.
If a “create” fails, you will see:
Can' t use same channel
or
Create rejected, reason “n,”
where:
●
If “
n
” =
1
or
11
, the request from the local (
1
) or remote (
11
) end was bad. Either
the channel requested was
0
or the LP/port was not operational.
●
If “
n
” =
2
or
12
, the PVC already exists at the local
(2
) or remote (
12
) end.
If a “delete” fails, you will see:
Remove rejected, reason “n,”
where:
●
If “
n
” =
3
, local end of PVC does not exist.
●
If “
n
” =
4
, remote node number is incorrect.
●
If “
n
” =
5
, remote LP/port is incorrect.
When finished with these operations, press any key to return to the
Subscriber ID
:
prompt, then press
[F3]
to return to the Operations Menu.