Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 188 / 468

12-12 FRX8000 3. 0 User G uide, Rev 02
Autocall
allows automatic calling between the local and remote devices as soon as one or the
other becomes active. Specifying
Y
on a TPAD port will initiate autocall from the local
subscriber device.
Autocall Timer
is the length of time between autocalls if there is no response from the remote end.
Maximum Retry Autocall
is the maximum number of times an autocall will be sent.
Configuring BSC Interactive Devices
This file contains identifying information for each BSC HPAD and TPAD cluster con-
trollers. Press
[G]
, then
[B]
, then
[C]
from the Ports Selection Menu (or
[A], [D], [G], [B],
[C]
from the Main Menu). When prompted, enter:
●
Node ID
:
1–250
. (Default is the local node.)
●
LP ID
:
0–7
. (Default is
0
.)
●
BSC Port
:
0–7
. (Default is
0
.)
●
Connection ID
:
0–255
. This is an internal identifier that must match a Connection
ID in the BSC Interactive Subscribers record (described earlier in this chapter).
●
CU
(control unit)
Number
:
0–31
. (See Table 12-4 .)
●
Device Number
:
0–31
. (See Table 12-4 .)
●
Any other requested information, noting the values in Table 12-5 . (Press
[Enter]
at a prompt to specify the default value.)