Cabletron Systems Netlink FRX8000 Скачать руководство пользователя страница 359

Страница: 359 / 468

Alarms

21-37

291.

Node “n”, Type “n”, LP “n” in database but does not exist

Severity:

Meaning:

The LP file contains a record for LP “n,” but either the hardware is
not installed or the configuration is wrong.

Action:

Install the LP or fix the configuration.

292.

Node “n” LP “n” exists but not loaded due to mismatch with database

Severity:

Meaning:

The LP type specified in the database does not match the physical
type that exists in the system, so it was not loaded during IPL.

Action:

Check the LP record and change the LP type, if necessary.

293.

Node “n”, LP “n” exists but is not in database

Severity:

Meaning:

The packet processing system has found an LP in the node for which
there is no record in the database.

Action:

Create a record for this LP.

294.

IPL of DPPM node “n”, LP “n” complete

Severity:

Meaning:

Self-explanatory.

304.

LP “n” Threshold violation LP Percent Buffers in Use Threshold “n”,
Current value “n”

Severity:

Meaning:

The statistic has crossed the threshold.

305.

LP “n” Threshold violation

LP Number of Queued messages Threshold “n”,

Current value “n”

Severity:

Meaning:

The statistic has crossed the threshold.

306.

LP “n” Threshold violation

LP Received Frames/Sec (*10) Threshold “n”,

Current value “n”

Severity:

Meaning:

The statistic has crossed the threshold.

307.

LP “n” Threshold violation

LP Transmitted Frames/Sec (*10) Threshold “n”,

Current value “n”

Severity:

Meaning:

The statistic has crossed the threshold.

Содержание Netlink FRX8000





















































































































































































































































































































































































































































































Результаты поиска

Содержание Netlink FRX8000

Отзывы:

Cabletron Systems Netlink FRX8000, Руководство пользователя, Страница: 359 / 468

Результаты поиска

Содержание Netlink FRX8000

Отзывы: