Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 207 / 468

Configuring Async Pads 13-17
Configuring Subscriber IDs
This operation creates records for the called and calling addresses that will be used in
X.25 call setup if async traffic will be transported over X.25 or (via an X.25 logical
port) frame relay. To complete the connection, the software must recognize where the
call is coming from (calling address) and where it is going (called address).
To configure an SVC Subscriber record, press
[A]
, then
[C]
at the Subscriber Config-
uration Menu (or
[A], [F], [A], [C]
from the Main Menu). When prompted, enter a
Subscriber ID
, up to 15 digits (as described on page 9-15 ). (The default is an asterisk,
a universal wildcard.) If this is an existing record, a screen similar to Figure 13-4 will
be displayed. If this is a new record, enter the remaining requested information, noting
the values in
Table 13-4 .
Figure 13-4 SVC Subscriber Record
[A], [F], [A], [C]
from Main Menu
The parameters displayed by pressing [1] or [2] are listed in Table 13-4 .
When Changes Take Effect
When you add a new Subscriber record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database immediately.
The change will become effective as soon as the next call is placed. (The change will
not affect a call in progress.)
Su bscrib er Maintenance
* S ubs criber ID 10000100001
A S ubs criber Name frs ub1
B D ialup S ubs criber N
C R outing Algorithm 0 R ound Rob in
D S ystematic R ed irection Y
E R ed irect on Busy N
F R ed irect on Ou t of Order N
G Ban dw. A llocation Grou p 1
1 R outing Paths
2 R ed irection Add ress es
Select: