manualshive.com logo in svg

Cabletron Systems Netlink FRX8000, Руководство пользователя

Продукт Cabletron Systems Netlink FRX8000 - это высококачественный коммуникационный устройство для организации сетей. Для удобства пользователей доступен Installation And Setup Manual для скачивания бесплатно на manualshive.com. Этот руководство в формате pdf поможет вам правильно настроить и установить ваше оборудование.

Поделиться
Скачать
background image

iii

Cabletron Systems reserves the right to make changes in specifications and other information 
contained in this document without prior notice. The reader should in all cases consult 
Cabletron  Systems  to determine  whether any such  changes  have been made.

The hardware, firmware, and/or software described in this manual is subject to change without 
notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, 
INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER 
(INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR 
RELATED TO THIS MANUAL OR THE INFORMATION CONTAINED IN IT, EVEN IF 
CABLETRON SYSTEMS HAS BEEN ADVISED OF, KNOWN, OR SHOULD HAVE 
KNOWN, THE POSSIBILITY OF SUCH DAMAGES.

Copyright 1997, 1998  by Cabletron  Systems, Inc. All rights  reserved. Printed  in the  United 
States of America. Order Number: FRX8-USR-DOC.

VxWorks is a copyright of Wind River Systems, Inc.

IP (Internet Protocol) code is copyright 1982, 1986 by Regents of the University of California. 
All rights  reserved. This  Cabletron  product  includes software developed  by the University  of 
California, Berkeley, and its contributors. IP software is provided by the regents and contrib-
utors  “as  is” and any express  or  implied  warranties, including, but not  limited to, the  implied 
warranties of  merchantability and  fitness for a particular purpose,  are disclaimed.  In no  event 
shall the regents  or contributors be liable  for  any  direct,  indirect, incidental,  special, exem-
plary, or consequential damages (including, but not limited to, procurement of substitute goods 
or  services; loss of use,  data, or profits; or business  interruption)  however  caused and on  any 
theory of liability, whether in contract, strict liability, or tort (including negligence or oth-
erwise) arising in any way out of the use of this software, even if advised of the possibility of 
such damage.

Gateway Daemon (GateD) software, Release 3.5.5, is maintained and developed by Cornell 
University and its collaborators. The version of GateD used with this Cabletron product has 
been modified.

Netlink is a trademark of Cabletron Systems, Inc. All other product designations are the 
property of their respective owners.

Statements of Compliance

FCC

This device  complies with Part  15 of  the FCC rules.  Operation is subject  to  the following two 
conditions:  (1) this device may not cause  harmful interference,  and (2) this device  must accept 
any interference received, including interference  that may  cause undesired  operation.

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part  15 of the  FCC rules.  These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This  equipment uses,  generates, and can  radiate radio frequency  energy and if not 
installed in  accordance with the operator’s manual,  may cause  harmful interference to  radio 
communications. Operation  of this equipment in a residential area  is  likely  to cause  inter-
ference in which case the user will be required to correct the interference at his own expense.

Changes or modifications made to this device which are not expressly 
approved by Cabletron Systems could void the user’s authority to operate the 
equipment.

 

Содержание Netlink FRX8000





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Netlink FRX8000

Ubiquiti Bullet Quick Start Manual preview
Bullet
Бренд: Ubiquiti Страницы: 40
iDirect iQ Desktop+ Installation, Support, And Maintenance Manual preview
iQ Desktop+
Бренд: iDirect Страницы: 52
Alesis QUADRAVERB Reference Manual preview
QUADRAVERB
Бренд: Alesis Страницы: 61
Renesas Compact Emulator M30620T-CPE User Manual preview
Compact Emulator M30620T-CPE
Бренд: Renesas Страницы: 52
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Бренд: Garland Страницы: 30
Hanwha Techwin Wisenet PRN-6400B4 Quick Manual preview
Wisenet PRN-6400B4
Бренд: Hanwha Techwin Страницы: 14
ZALMAN FS-V7 User Manual preview
FS-V7
Бренд: ZALMAN Страницы: 9
Altera Nios II Hardware Development Manual preview
Nios II
Бренд: Altera Страницы: 42
8level IPG-200 User Manual preview
IPG-200
Бренд: 8level Страницы: 52
ZALMAN CNPS7700 LED User Manual preview
CNPS7700 LED
Бренд: ZALMAN Страницы: 9
Advantech PCM-4141 Series User Manual preview
PCM-4141 Series
Бренд: Advantech Страницы: 96
IBM 7311-D11 Removal And Replacement Procedures preview
7311-D11
Бренд: IBM Страницы: 74
Variscite VAR-SOM-MX6 HEAT PLATE KIT Quick Start Manual preview
VAR-SOM-MX6 HEAT PLATE KIT
Бренд: Variscite Страницы: 3
Abus TVAC21000 User Manual preview
TVAC21000
Бренд: Abus Страницы: 98
HYCON HY17S68 Series Hardware User Manual preview
HY17S68 Series
Бренд: HYCON Страницы: 13
N-Tron 900B Installation & User Manual preview
900B
Бренд: N-Tron Страницы: 21
Acconeer XE132 Getting Started Manual preview
XE132
Бренд: Acconeer Страницы: 13
Digi TransPort WR41 Quick Start Manual preview
TransPort WR41
Бренд: Digi Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды