Cabletron Systems Netlink FRX8000 Скачать руководство пользователя страница 267

Страница: 267 / 468

On-line Operat ions

18-11

10. When asked:

Do you want the kernel environment rebuilt?

, type

y [Enter]

11. At the

prompt, type

shutdown -g0 [Enter]

. (

is “zero.”)

12. When asked:

Do you want to continue?

, type

y [Enter]

13. When prompted:

Press any key to Reboot

, press any key.

14. At the

UNIX

boot prompt, press

[Enter]

15. When prompted to type

Control-D

or enter your root password, press

[Ctrl] [D]

16. At the login prompt, enter your login name and, if requested, login password.

17. At the

[NETLINK]

prompt, type

nmpini [Enter]

. The NMP is now operational.

18. At the node, if the screen is blank or is displaying:

Node is Operational

, press

[R]

If the

NBM Performance Display

is on the screen, press

[R]

twice.

19. When prompted:

Reboot

(

to reboot,

to terminate), press

[T]

20. At the

promptitude:

cp upia.o /etc/conf/pack.d/pia/Driver.o [Enter]

21. At the next

prompt, type

cd /etc/conf [Enter]

22. At the next

prompt, type

/etc/conf/bin/idbuild [Enter]

23. When asked (after 5-10 minutes):

Do you want this kernel to boot by default?

type

y [Enter]

24. When asked:

Do you want the kernel environment rebuilt?

, type

y [Enter]

25. At the

prompt, type

shutdown -g0 [Enter]

is “zero.”)

26. When asked:

Do you want to continue?

, type

y [Enter]

27. When prompted:

Press any key to Reboot

, press any key.

28. At the

UNIX

boot prompt, press

[Enter]

29. When prompted to type

Control-D

or enter your root password, press

[Ctrl] [D]

30. At the login prompt, enter your login name and, if requested, login password.

31. At the

[NETLINK]

prompt, type

start [Enter]

32. When

Node is operational

is displayed, press

[Alt] [F3]

33. At the

UNIX

34. At the

[NETLINK]

prompt, type

kill -9 -1 [Enter

35. At the

UNIX

[Alt] [F1]

36. At the

UNIX

37. At the

[NETLINK]

prompt, type

start [Enter].

When the node is able to commu-

nicate with the network,

Node is operational

will be displayed.

Содержание Netlink FRX8000





















































































































































































































































































































































































































































































Результаты поиска

Содержание Netlink FRX8000

Отзывы:

Cabletron Systems Netlink FRX8000, Руководство пользователя, Страница: 267 / 468

Результаты поиска

Содержание Netlink FRX8000

Отзывы: