Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 250 / 468

16-6 FRX8000 3. 0 User G uide, Rev 02
Severity
determines the lowest severity-level traps (events) that will be sent to the specified
address. (1 is the highest.) For example, if
3
is specified, traps of severity levels 1, 2,
and 3 will be sent (assuming the menu item is enabled).
There are four levels of severity:
●
Level 1 = Serious fault. This is a serious error and immediate action is required.
●
Level 2 = Major fault/link alarm. Link alarms 400–406 are at this level simply
to show importance; for any other events, take action as soon as possible.
●
Level 3= Minor fault/traffic disturbance. Clear the fault at the first suitable
occasion.
●
Level 4 = Configuration error/informational event. Depending on the event, no
action may be necessary and, if so, correcting the configuration of certain
database parameters may be adequate.
Alarm messages and their severity levels are listed in Chapter 21 .
Model
Identification of the hardware chassis is necessary if a network manager device with
graphics capabilities will be used to access the node. Some manager devices can
display a graphic representation of the configured chassis.
If
4
was specified for
Parameter Type
after selecting
Configure SNMP Parameters
, enter
(when prompted) a model number:
1
= Model 1
2
= Model 2
3
= Rackmount Node
4
= High-Availability Node
Model 1
and
High-Availability Node
are not standard platforms, but
are supported for existing customers.