Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 142 / 468

9-24 FRX8000 3. 0 User G uide, Rev 02
bbbbbbbbbbbbbb
is up to 15 digits of calling address,
U
is the letter “
U
,” which precedes any user data, and
ddddddddddd
is a user data field of up to 12 numeric characters.
The fields must match the equivalent fields in the Call Request packet, but not neces-
sarily literally—they can use wildcards to do so.
Replacing Fields in a Translation Template
Replacing Called/Calling Address or User Data
To replace all or part of any of these fields, enter a string formatted with the following
rules:
L = Literal digits, which means that the actual digits you enter here will replace that
same number of digits in the specified field. Type
L
followed (with no spaces) by
the desired digits,
0–9
. For example, typing
L1234 [Enter]
will replace four digits
in the selected part of the field with the actual numbers
1234
.
X = Called address. The characters entered here are not necessarily the exact char-
acters of original called address, but rather the characters (digits or wildcards) of
the template ID that match the original called address (that part not already trans-
lated).
Type X followed (with no spaces) by the desired characters,
1–9
,
A–F
, indicating
which positions of the 15 digits in the original called address are to replace the selected
portion of the packet. For example, typing
X1234 [Enter]
takes the first, second, third,
and fourth characters of the (remaining) original called address part of the template ID.
The matching procedure is described in the following example. Assume:
●
The called address of the packet is
31101234567800
.
●
The Template ID is
3110??*U123??
.
●
The Translation Formula is
L1234X567
.
The translation inserts literal digits
1234
, then takes the characters from the original
called address that match the fifth, sixth, and seventh characters of the Template ID
(??*).??
matches the first two characters from the called address that have not already
been changed (
12
), and
*
matches the entire string of remaining characters. Therefore,
the translation result is
12341234567800
.
G
=
Calling address
. The characters entered here are not necessarily the exact char-
acters of original calling address, but rather the characters (digits or wildcards) of
the template ID that match the original calling address.
Type
G
followed (with no spaces) by the desired characters,
1–9
,
A–F
, indicating
which positions of the 15 digits in the calling address are to replace the selected
portion of the packet.
U
=
Original user data
. Note that the user data field is divided into four bytes of pro-
tocol identifier followed by twelve bytes of “real” user data; the only part that can
be changed here is the real user data. The characters entered here are not the
actual characters of user data, but the characters (digits or wildcards) of the tem-
plate ID that match the original user data (that part not already translated).
Type
U
followed (with no spaces) by the desired characters,
1–9
,
A–C
, indicating
which positions of the twelve digits in the original user data are to replace the
selected portion of the packet.