Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 336 / 468

21-14 FRX8000 3. 0 User G uide, Rev 02
65.
(Filename) not current. Run database conversion (dbmcvt).
Severity: 1
Meaning: This message appears when you are installing new software into an
INM/NMP, and is a warning that the designated file is not consistent
with the database.
Action: Make certain the INM/NMP is disconnected from the operational
network, then type
dbmcvt [Enter]
at the
[NETLINK]
prompt.
66.
Async-only LP “n” received non-async configuration for Port “n”
Severity: 3
Meaning: Someone has tried to configure an N74/7500 async (standard) LP
daughter card port (4–7) as something other than async.
Action: Change the Port record to show the port type as async.
67.
DBM error –1 reading (file) “n” block “n”
Severity: 1
Meaning: The database manager has encountered some problems with the disk
or the file.
Action: Contact Cabletron Systems Technical Support . (See page 21-7.)
68.
DBM can't open file (filename)
Severity: 3
Meaning: The database manager cannot open the file. This error message will
only occur during initialization of the database manager (start-up of
the INM/NMP software).
Action: Restart the INM/NMP. If the problem persists, it may mean that
your disk is corrupted. In that case, you need to restore the database
with a good copy. (See
Appendix B .)
69.
LOGTSK can't create (filename)
Severity: 3
Meaning: An attempt has been made to back out a file creation transaction.
This transaction cannot be backed out, and the database master flags
this node as needing database recovery.
Action: Wait for the message telling you which node needs recovery, then
perform a recovery. (See “
Database Recovery ” on page 18-20.)
70.
LOGTSK can't open or create LOGFIL.DAT
Severity: 1
Meaning: The database logging task was unable to create or open the database
logging file.
Action: At the INM/NMP where the message occurred, type
stop [Enter]
at
the
[NETLINK]
prompt. When the NMP processes have stopped, type
nmpini [Enter]
. If you see the message again, call Cabletron Systems
Technical Support . (See page 21-7.)