Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 120 / 468

9-2 FRX8000 3. 0 User G uide, Rev 02
Configuring an X.25 Port Record
To configure a port for X.25, press
[A]
, then
[C]
from the Ports Selection Menu (or
[A],
[D], [A], [C]
from the Main Menu). When prompted, enter:
●
Node ID
(of the node containing the port):
1–250
. (Default is the “local” node.)
●
LP ID
(of the LP containing the port):
0–7
. (Default is
0
.)
●
Port
:
0–7
for a physical port on an RLP,
0–3
for a port on an AST LP (N7400/
7500 only),
8–63
for a logical port on an RLP. (If you specify a logical port, enter
the number of the associated physical frame relay port when asked.)
●
Any other requested information, noting the values in Table 9-1 . (Press
[Enter]
at a prompt to specify the default value.)
The display depends on whether you are configuring a physical port (Figure 9-1) or a
logical port (Figure 9-2).
Figure 9-1 Physical X.25 Port Record
[A],[D],[A],[C]
from Main Menu
Item M will be displayed only if the LP is an RLP and Physical Interface is
RS-530, RS-422, or V.35 , and Generate Clock is Y .
If the port is in an N7000 node:
•
Item
E
will not be displayed.
•
Item 2 will be X.25 - 7000 params.
•
Item
3
will be
X.25 CUG Mngmt/Group Send
Pressing [1], [2], or [3] will display more parameters, listed in Table 9-1 .
Port Maintenan ce
*
Nod e ID 10 nod e10
* LP I D 0 RLP
* Port 1
A Port Type 2 X.25
B Physical In terface 5 V.35
C Block ed Port Flag N
D Line S peed Cod e 10 9600 b ps
E Modulus 8
F Outstan ding Frames 2
G N2 Maximu m Retransmiss ion s 5
H T1 Retran smiss. Period-ms 2000
I T2 Acknow ledg. D elay-ms 1000
J T3 Lin k A ssu ran ce Period -s 10
K Logical DCE Y
L Gen erate C lock Y
M Rcv Clock (TT) from DTE N
N Mask Link Alarms Y
1 X.25/Level 3 Part 1
2 X.25/Level 3 Part 2
3 X.25 C UG Management
Select: