Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 428 / 468

F-6 FRX8000 3. 0 User G uide, Rev 02
Enabling/Disabling Automatic Accounting File Rollover
The call accounting feature logs call activity to a file on the hard disk. Chapter 18
describes how to manually enable call accounting, roll the active file over (close the
file and open a new one), copy old files to diskette, and delete old files.
Enabling Automatic Rollover
You can specify a maximum size for the call accounting file and enable automatic
rollover of the file. Keep in mind, however, that you must still manually copy backup
files to diskette(s), then delete them from the hard disk.
A rollover saves the current file to a backup file. Since these files
can be quite large, disk space can be quickly used up if the
backup files are not regularly copied to diskette and deleted
from the hard disk.
Automatic rollover is enabled by editing the file named .cshrc, using the UNIX
vi
text
editor.
Call accounting must be turned off before editing .cshrc.
At the
[NETLINK]
prompt, type
ll [Enter]
(
ll
is two lowercase L's, and stands for “Log
List”); if a file named .ACCNT is present, call accounting is on.
Turn Off Call Accounting
1. At the [NETLINK] prompt, type util [Enter] .
2. At the NMP Utilities Menu, type 3 [Enter] and follow the prompts. When done,
exit the menu to the [NETLINK] prompt.
3. Type gcon [Enter] (or consol [Enter] if at an Auxiliary Console) to enter the Main
Menu.
4. At the Main Menu, press [B] , then [G] , to perform an on-line update of the
Network Defaults file. When finished, press [F3] twice to return to the Main
Menu.
Edit the File
1. Press
[R]
at the Main Menu to return to the
[NETLINK]
prompt.
2. At the
[NETLINK]
prompt, type
vi /u/netlink/.cshrc [Enter]
.
3. After the file is displayed, press
[G]
to move the cursor to the last line.
4. Press
[O]
to add a line below the cursor position.
5. Type
setenv ACCT_ROLL
“
n
” (do not press
[Enter]
), where “
n
” is the desired file
size in megabytes.
6. Press
[Esc]
.