Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 434 / 468

G-4 FRX8000 3. 0 User G uide, Rev 02
FRX8000 INM
Starting an INM
1. Switch on the VGA monitor or Auxiliary Console (and modems if part of the con-
figuration), then the printer (if present), then the INM. After a few seconds, this
will be displayed on the monitor/console:
SCO System V/386
Boot
:
2. Press
[Enter]
. (If any files are corrupted because the system was not shut down
properly, error messages will be displayed. Press
[Enter]
if requested to do so.)
3. You will be prompted:
Type Control-D to proceed with normal startup
(or give root password for system maintenance)
Press (simultaneously)
[Ctrl] [D]
.
4. The current system date and time will be displayed. Press
[Enter]
to accept the
displayed values, or enter the correct values, in the format:
YYMMDDhhmm
,
where:
YY
= year (
00 to 99
)
MM
= month (
01 to 12
)
DD
= day (
01 to 31
)
hh
= hour (
00 to 23
)
mm
= minute (
00 to 59
)
If you only need to change the time, enter the hour and minute; to change the year,
month, or day, you must enter the entire string, including hour and minute.
5. Various messages will be displayed, ending with: Check protected subsystem
database (y/n)? Type y [Enter] .
6. scosysv!login: will be displayed. Type netlink [Enter] .
7. When asked for a password, type mypass [Enter] .
8. At the [NETLINK] prompt:
◆
If you are at a local VGA monitor, type start -icp [Enter] .
◆
If you are at an Auxiliary Console, type start -icp & [Enter] .
The ICP software will start, and the FRX8000 Test Menu ( Figure G-1 ) will be
displayed.
If you want to access the INM menus:
1. Press [Alt] [F3] (or [Alt] [PF3 ] on an Auxiliary Console) at the FRX8000 Test Menu .
2. At the scosysv!login: prompt, type netlink [Enter] .
3. When asked for a password, type mypass [Enter] .
4. At the [NETLINK] prompt:
◆
If at a VGA monitor, type gcon [Enter] .
◆
If at an Auxiliary Console, type consol [Enter] .