Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 246 / 468

16-2 FRX8000 3. 0 User G uide, Rev 02
Configuring SNMP Parameters
To configure SNMP parameters for the FRX8000 node, press
[B]
, then
[C]
from the
Node Selection Menu (or
[A], [B], [B], [C]
from the Main Menu). When prompted,
enter:
●
Node number: 1–250
.
●
Parameter Type
:
1
= SNMP System Defaults
2
= Community Parameters
3
= Trap Parameters
4
= Model (hardware chassis)
●
Any other requested information, as described in the following paragraphs.
System Defaults
System defaults are entries that will be included in IPL messages to the SNMP agent,
and will be stored for access via the MIB. Changes to these parameters can be made
either in this record or through the SNMP agent.
If 1 was selected for Parameter Type , enter (when prompted) an index number:
1 if you want to specify a System Name.
2 if you want to specify a System Contact.
3 if you want to specify a System Location.
Figure 16-1 SNMP System Defaults Menu
[A],[B],[B],[C] from Main Menu
Item
A
will be different if
2
or
3
was selected for
Index
.
S NMP Parameters Maintenan ce
Node I D 100
SNMP Parameter Type 1 S ystem Parameters
Ind ex 1 S ystem N ame
A System N ame ABC DE
S elect: