Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 270 / 468

18-14 FRX8000 3. 0 User G uide, Rev 02
There are two safeguards, each accompanied by alarm messages, that alert the
operator when disk space is diminishing to an unacceptable amount. At the first level,
if call accounting is turned on, no further incoming calls are accepted. The second
level is reached as a result of call activity that was in progress when the first level was
passed. At this level, the ICP/INM/NMP
is “shut down”; that is, all NMP processes
are stopped, and you must back up your Call Accounting file and restart the
ICP/INM/NMP.
Turning Call Accounting On or Off
1. Type
util [Enter]
at the
[NETLINK]
prompt.
2. Type
3 [Enter]
at the NMP Utilities Menu.
3. If the NMP processes are not stopped, you will be asked:
Stop NMP processes to
change call accounting?
Type
y [Enter]
.
4. When/if the NMP processes are stopped, you will be prompted:
Call Accounting
is off
(or
on
)
Turn it on
(or
off
)
?
Type
y [Enter]
.
5. Press
[Enter]
to return to the NMP Utilities Menu.
6. Type
[9] [Enter]
to return to the
[NETLINK]
prompt.
7. Type
gcon [Enter]
(or
consol [Enter]
if you are at an Auxiliary Console) to return
to the Main Menu.
8. Perform an
On-Line Update of Network Defaults
(
[B], [G]
from Main Menu) to send
the information to the nodes.
Accounting File Rollover Operations
Checking Available Disk Space
It is recommended that available disk space be checked every eight hours until the
proper frequency of maintenance can be determined. To check disk space, type
df -v [Enter]
at the
[NETLINK]
prompt. A message similar to the following will be dis-
played:
Mount Dir Filesystem blocks used free % used
/ /dev/root 172730 110714 62016 72%
% used
in the
/dev/root
directory should not exceed
75-80
.
Displaying the File
The current Call Accounting file can be displayed in two ways; one is a current
record as the file builds on the ICP/INM/NMP, the other a history of the file from it's
beginning to the present. For both types of display, press
[R]
at the Main Menu to exit
to the
[NETLINK]
prompt. To see a list of the options, type
caf [Enter]
.
Some examples of the options are as follows:
●
You can display all records in the file as it builds. The file will remain open and
the display will continue to build until you press
[Del]
to cancel the operation, or
until the file is rolled over.
◆
To display the file, type:
tail -f database/CAF.DAT | caf -a [Enter]
,