Cabletron Systems Netlink FRX8000, Руководство пользователя, Страница: 42 / 468

4-2 FRX8000 3. 0 User G uide, Rev 02
Configuring Network Defaults
The Network Defaults file contains one set of parameters whose values apply to all
FRX8000 and Nucleus 74/7500 nodes in the network. This differs from other database
files, which contain individual records for each component type (nodes, LPs, ports,
etc.). This file also differs from other database files in that you cannot initialize
(described in Chapter 3) the file, or add or delete records.
To configure Network Defaults, press
[A]
, then
[C]
from the Network Selection Menu
( Figure 4-1 ).
Figure 4-2 Network Defaults File Display
[A],[A],[A],[C]
from Main Menu
Pressing [1], [2] , or [3] displays more parameters, listed in Table 4-1 .
X.25 defaults are used to maintain compatibility among nodes; some values
will be overridden by values in the Port file.
Although item 1 is X.25/X.75 Parameters, FRX8000 does not currently
support X.75.
Netw ork D efau lts Main ten ance
Cu rrent N ode N umber 10 ABCN ode
Datab ase Master Node 10 ABCN ode
A Network Name “Y our name here”
B ELP Page Size 62
C Outpu t Leading 0s on ELP N
D Call Actg Timer (Hrs /10) 0
E Call Actg Seg. Size 128
F DN IC 0000
G Line Discnct Timeout (sec) 1
H Modem Discnct Timeout 0
I IP N etw ork A ddress 100.100.100.0
J IPX WAN Network Add ress 00000001
1 X.25/X .75 Parameters
2 X.25 D atabase D efau lts
3 Band width Configuration
Select: