Cabletron Systems Netlink FRX8000, Руководство пользователя, Страница: 274 / 468

Converting N7000 5.0 Database Records
Certain database files (described later) contain parameters that differ between records
for an FRX8000 node and a Nucleus 7000 (Release 5.0) node. Updating an N7000 to
be an FRX8000 requires a database conversion operation to change the incompatible
parameters.
One or all nodes can be converted at a time. After that, the changes will be imple-
mented at the node(s) in the normal way (also described later).
1. Press
[H]
at the Node Operations Menu (or
[B], [B], [H]
from the Main Menu).
2. When prompted, enter your low-level operations password.
3. When prompted, enter the node ID, or press
[Enter]
to convert the records for all
nodes. If you press
[Enter]
, you will be asked if you really want to do this. If you
do, press
[Y]
. A file named NOD.CVT will be created, showing the results of the
process.
The following parameters will be deleted or changed:
File Parameter Change
Node 7000 Node
Y
to
N
Node Type
7000
to
8000
, although the number
displayed in a record will be the same
Async Terminal Control Deleted
DOS Extended Mode Deleted
8000-only parameters Added (see Chapter 5 ) *
LP LP Type
6
(RLP-7000 Node) to
7
(RLP)
RLP Memory Added *
Protocol 1–5 Added *
Physical Port Type
12
(PDN) to
2
(X.25)
PDN Port Modulus Copied from Network Defaults
Max Window Size Added *
Max Throughput Class Added *
Restart Timer Copied from Network Defaults
Incoming Call Timer Copied from Network Defaults
Reset Timer Copied from Network Defaults
Clear Timer Copied from Network Defaults
DTE Restart Retry Count Copied from Network Defaults
DTE Reset Retry Count
Copied from Network Defaults
DTE Clear Retry Count Copied from Network Defaults
Reverse Charge Accept. Added * **
Fast Select Acceptance Added * **
Incoming Calls Barred Added * **
Outgoing Calls Barred Added * **
* New parameters will be set at their default values.
** In N7000, existed in Subscriber file.