Cabletron Systems Netlink FRX8000, Руководство пользователя

Страница: 327 / 468

Alarms 21-5
Figure 21-2 On-Line Alarm Routing Screen
[D],[D] from Main Menu
After making your changes, press
[F1]
to implement them. If you enter a value, but
change your mind before pressing
[F1]
, press
[F2]
to cancel and return to the
Select:
prompt. The change(s) will remain in effect until the next IPL or until you make sub-
sequent on-line changes to the same parameters.
Press
[F3]
to return to the Alarms Menu.
Loading Default Routing Values
With this operation, you can restore the default alarm routing parameters defined in
the Node record (see Chapter 5) without waiting to re-IPL a node. You do not need
master status to perform this operation.
Press
[E]
at the Alarms Menu (or
[D], [E]
from the Main Menu). Enter the ID of the
node whose default routing you want to restore. You see the message:
Routing Param-
eters Loaded
. Press
[F3]
to return to the Alarms Menu.
On-Line Parameter C hange for Alarm Routing
N ode: 2 Chicago2
A Level 1 Primary Node 10
B Level 1 Secon dary Nod e 11
C Level 2 Primary Node 10
D Level 2 Secon dary Nod e 11
E Level 3 Primary Node 10
F Level 3 Secon dary Nod e 11
G Level 4 Primary Node 10
H Level 4 Secon dary Nod e 11
S elect: