Hornington AirStation WHR-G300N, Настройки

Страница: 1 / 6

WHR-G300N Router Settings (For: Pccw, HGC PPPoE User)
Hardware Setup of WHR-G300N Router:
:
1. Set Router switch to “ ON ”.
2. Power on Buffalo Router, and wait for 1 minutes.
The “
Power ”, “ Security ”, “ Router ” and “ Wireless ” indicators will be
ON , and other indicator will be OFF .
3. To reset the router, please insert “ RESET ” hole by a paper clip for about
10 seconds, and wait for 1 minute. The “ Power ”, “ Security ”, “ Router ”
and “ Wireless ” indicators will be ON , and other indicator will be OFF .
4. Please connect your broadband service with a network cable (or from
DSL modem) to the “ Internet ” port on the ROUTER. Then use another
network cable to connect “ LAN1 ” port on the ROUTER to the Ethernet
adapter on your PC. Make sure indicators “ Internet ” and “ LAN1 ” near
lan ports are ON .
5. Wait for 1 minute.
Last Updated 01/11/2008 Hornington KB: http://kb.hornington.com WHR-G300N PPPoE Settings Page 1